Tous les résumés

Authors

Company/University

Name of paper

Theme

 
 
 

CAO Duc Toan
Lorenzo Sanavia

Universit degli Studi di Padova, Italia

Behaviour of multiphase geomaterial under frictional heating effects with application to rapid landslide

 (GEE)

 

Van Manh NGUYEN
Heinz KONIETZKY 
Quang Phich NGUYEN

Hanoi University of Mining and Geology (HUMG), Vietnam
and
TU Bergakademie Freiberg, Germany

The shear behavior of rough rock joints under cyclic shear loading

 (GEE)

 

Tuan Anh BUI
Henry WONG
F. Deleruyelle
N. Dufour
C.J. Leo
D.A. Sun

Université de Lyon/ENTPE/LTDS (UMR CNRS 5513)

Analysis estimation of hydro-mechanical evolutions around an underground cavity under the influence of saturated host rock creep

 (GEE)

 

Minh Thang LE

Department of Civil Engineering, College of Technology, Danang University, Danang City, Vietnam

Adjusted rapid oedometer test for evaluating consolidation behaviors of soft clay

 (GEE)

 

Xiaoquin LEI 
Henry WONG
Antonin FABBRI
Ali LIMAM
Y.M. Cheng

Laboratoire de Génie Civil et d’Ingénierie Environnementale, INSA de Lyon

Chemo-poro-elastic simulation of salt solution infiltration process in unsaturated expansive clays

 (GEE)

 

 Van Tri NGUYEN
Anh Minh TANG
Jean Michel PEREIRA

Ecole des Ponts ParisTech, Laboratoire Navier

Thermo-active geostructures in tropical climate countries

 (GEE)

 

 Quang Phich NGUYEN

Hanoi University of Mining and Geology (HUMG), Vietnam

About the geomechanical process around underground tunnel  in the rock mass with rheological and strain-softening behaviour

 (GEE)

 

 Quang Phich NGUYEN

Hanoi University of Mining and Geology (HUMG), Vietnam

Using numerical simulation as tool for predition, analysis and mitigation of geohazards in mining and tunneling in Vietnam

 (GEE)

 

 Quang Phich NGUYEN
 Manh Khai NGUYEN

Hanoi University of Mining and Geology (HUMG), Vietnam

Dvelopment of polyme clay nano composite for rock bolt shank using in underground construction in Vietnam

 (GEE)

 

Vinh-Du THAN
Jean Noel ROUX
Anh-Minh TANG
Jean Michel PEREIRA

Ecole des Ponts ParisTech, Laboratoire Navier

Discrete element simulation of bonded granular soils: plastic compression

 (GEE)

 

Etienne FROSSARD    

Cristian NIETO-GAMBOA

TRACTEBEL Engineering-COYNE et BELLIER

Effets d'échelle dans le comportement des barrages en remblais granulaires

 (GEE)

 

Khoa-Van NGUYEN
Thierry JEANMAIRE
Jean-Marie ANFRAY
Alain GUILLOUX
Julia de CACQUERAY

TERRASOL

Étude de comportement sismique d’une digue brise-lame par des calculs dynamiques aux éléments finis

 (GEE)

 

Khoa Van NGUYEN
Pierre-Louis LORIFERNE
Florent MATHONIERE

TERRASOL

Études géotechniques d’un ouvrage d’art spécifique de la LGV SEA Tours - Bordeaux

 (GEE)

 

Van-Linh Nguyen
Ahmad Pouya
Siavash Ghabezloo

Université Paris-Est, Lab. Navier/CERMES (IFSTTAR-ENPC-CNRS), Marne-la-Vallée, France

Hydromechanical behaviour of fractures under steady state fluid flow: Application to CO2 sequestration projects

 (GEE)

 

Silvana Montoya-Noguera
Fernando Lopez-Caballero

Laboratoire MSSMat CNRS UMR 8579, École Centrale Paris, France
Laboratoire MSSMat CNRS UMR 8579, École Centrale Paris, France

Effect of the discrete spatial heterogeneity on the bearing capacity of shallow foundations

 (GEE)

 

NGUYEN Van Nghia

Laboratory Mechanics of Soils - Structure and Materals (MSSMat), Ecole Central Paris (ECP),

Influence of soil parameters on erosion

 (GEE)

 

NGUYEN Van-Hung
LE Phuoc-Hao

Petrovietnam University, Vietnam

Experimental study of hydromechanical behaviour of unconsolidated and weakly consolidated reservoir rocks

 (GEE)

 

Jean Claude GRESS

Ecole Nationale des Travaux Publics de l'Etat. ACE Géotechnique consultant.Conseiller Technique d'Hydrogéotechnique

GOOD ASSESSMENT OF YOUNG MODULUS : A REAL DIFFICULTY FOR GEOTECHNICAL DESIGN

 (GEE)

 

Sergio  A. Irarrázaval Zegers

Soil & Water  Ingeniería Limitada, Santiago, Chile

SEED  LIQUEFACTION  METHOD  SPT  BASED

 (GEE)

 

Sergio  A. Irarrázaval Zegers

Soil & Water  Ingeniería Limitada, Santiago, Chile

THE  FLAT  DILATOMETER TEST : A NEW INSIGHT

 (GEE)

 

Fatiha DEBICHE
Ratiba  MITICHE KETTAB
Fadila  KHELFOUNE
Ammar NECHNECH

Faculté  de  Génie civil, Universités des Sciences et Technologie Houari  Boumediene
Département de  Génie Civil, Ecole Nationale Polytechnique Algérie

ETUDE D’IMPACT  DES TRAVAUX DE GEOTECHNIQUE SUR L’ENVIRONNEMENT

 (GEE)

 

DOAN Dinh Hong
Nauroy, J. F

FUGRO GeoConsulting SAS

Modelling of velocity dispersion in heavy oil sand

 (GEE)

 

Doan, D. H
Tang, A. M.
Delage, P.
Nauroy, J. F
Bui, M.

FUGRO GeoConsulting SAS

Temperature dependence of stress-strain behaviour of heavy oil sand

 (GEE)

 

Nguyen T. T. H.
Cui Y. J.
Herrier G.
Tang A. M.

Lhoist R&D, Nivelles, Belgique
and
Ecole des Ponts ParisTech

Stabilisation à moyen et à long terme des sols limono-argileux traités à la chaux : aspect mécanique

 (GEE)

 

Viet Hung Tran

Dept. of Urban Transport & Coastal Engineering, University of Transport and Communications, Vietnam

Source parameter estimation based on recorded accelerograms in Northwestern Vietnam

 (GEE)

 

Thanh Danh TRAN

MINES ParisTech – Centre de Géosciences, Fontainebleau, France /    Ho Chi Minh City Open University, HCMC, Vietnam

Rôle de la microstructure des sols argileux dans les processus de retrait-gonflement. Evolution de différentes microstructures argileuse soumis à l’humidification et/ou le séchage

 (GEE)

 

Huynh Dat Vu Khoa  Hans Petter Jostad

Norwegian Geotechnical Institute, Oslo, Norway

UDCAM: An undrained cyclic accumulation constitutive model for cyclic behaviour of clay

 (GEE)

 

Maria Grazia Madaffari
Arézou Modaressi
Nicola Moraci
Paolo S. Calabrò

École Centrale Paris, LMSS-Mat, CNRS UMR 8579,
92290 Châtenay-Malabry, France
and
Mediterranea University of Reggio Calabria, DICEAM, 89124 Reggio Calabria, Italy

Pumice characterization and heavy-metal removal efficiency modeling to be used in Zero Valent Iron-Pumice mixtures Permeable Reactive Barrier design.

 (GEE)

 

Hoang-Hung Tran-Nguyen
Masaki Kitazume
Hitoshi Tanaka
Toru Kobayashi
Khang Thien Truong
Tien Binh Nguyen
Phuong Anh Mai
Chau Dac Truong

Ho Chi Minh City University of Technology, Vietnam
and
Tokyo Instutue of Technology, Japan
and
Tohoku University, Japan
and
Something Vietnam Co. Ltd., Vietnam

Field experiment study on Deep Mixing Method to treat piping and sliding of earth levees in An Giang province, Vietnam

 (GEE)

 

Hoang-Hung Tran-Nguyen
Long Phi Le
Bao Khac Le
Masaki Kitazume
Hitoshi Tanaka
Toru Kobayashi
Khang Thien Truong
Chuong Hong Quach

Ho Chi Minh City University of Technology, Vietnam
and
Tokyo Instutue of Technology, Japan
and
Tohoku University, Japan
and
Something Vietnam Co. Ltd., Vietnam

Characteristics of soilcrete created at the field using the NSV technology to reinforce earth levees in Dong Thap province, Vietnam

 (GEE)

 

Pierre DUFFAUT
Jean PIRAUD
Philippe VASKOU

130 rue de Rennes 75006 Paris

Critères géotechniques pour un site de centrale nucléaire souterraine

 (GEE)

 

NGUYEN Bao Viet
PHAN Huy Dong
NGUYEN Quang Binh

Univeristy of Civil Engineering, Hanoi, Vietnam
CanTho Housing Development and Real Estate Company

The soft soils improvement using Cajeput timber piles

 (GEE)

 

PHAN Huy Dong
NGUYEN Bao Viet
VU Manh Quynh

University of Civil Engineering, Hanoi, Vietnam

Applicability of Large Diameter Cast-in-place Concrete Pipe Pile for foundation treatment in Vietnam

 (GEE)

 

Thuy Dung NGUYEN

Vietnam Institute of Architecture

Applying regulations and standards on space arragements in new urban areas of Hanoi

 (IDM)

 

Ngoc Anh DO
Daniel DIAS
Pierpaolo ORESTE

Hanoi University of Mining and Geology (HUMG)
Grenoble Alpes Univ., Labo LTHE, France
Politecnico di Torino, Italy

A procedure to estimate surface settlement trough over twin TBM tunnels

 (IDM)

 

Bruno PEUPORTIER
Charlotte ROUX

MINES ParisTech

Outils pour l'éco-conception des bâtiments et des quartiers

 (IDM)

 

Pierre Gosselet

ENS Cachan

Ensuring robustness of domain decomposition methods by block strategies

 (IDM)

 

NGUYEN Quang-Huy
MOHAMMED Hjiaj
NGUYEN Xuan Huy
NGUYEN Huy Cuong

INSA de Rennes

Finite Element analysis of a hybrid RCS beam-column connection

 (IDM)

 

Hue Van Huu
Quan Nguyen Anh

Department of Planning and Investment, Vietnam

Developing a relation to calculate the length of sheet pile for the way to the bridges

 (IDM)

 

Huu Viet NGUYEN
Ngoc Nguyen NGUYEN

Vietnam Investment Consulting and Construction Designing JSC

Research solution optimal of vertical structure in Vietnam

 (IDM)

 

Manh Tan DO
Hyun-Jong Sung
Gui-hyun Park
Young-Sang Kim

Hanoi University of Mining and Geology (HUMG), Vietnam

Prediction of the load transfer depth for cost-effective design of a ground anchor using FBG sensors embedded tendon and numerical analysis

 (IDM)

 

Valentine REY
Pierre GOSSELET
Christian REY

LMT-Cachan / ENS-Cachan, CNRS, Pres UniverSud Paris

Separation of sources of error in goal-oriented error estimation in domain decomposition methods

 (IDM)

 

Jean HETZEL

Chairman JOHANSON INTERNATIONAL
Président-fondateur de l’ICEB- institut des conseillers environnementaux pour le Bâtiment
Ancien trésorier et membre du bureau de l’association HQE

20 ans de pratiques de l’innovation
dans la construction des bâtiments

 (IDM)

 

Tuan-Minh TRAN
Duyen Phong NGUYEN

Ha Noi University of Mining and Geology (HUMG)

Research on determination of optimal distance between two unsupported tunnels when consideration to shape changes

 (IDM)

 

Nguyen Truong Thang
Pham Xuan Dat

National University of Civil Engineering (NUCE), Hanoi, Vietnam

Analysis and design of reinforced concrete rectangular columns to EC2 Parts 1.1 and 1.2

 (IDM)

 

Duy Lam DAO
Viet Trung NGUYEN

University of Transport and Communications, Vietnam

Analysis of stayed-cable replacing solution for in-service cable stayed bridge in Vietnam

 (IDM)

 

Hanh Quang LE
Phong Ngoc DO

FECON Institute of Foundation and Underground Engineering, Hanoi, Vietnam

Mobile web service-based pile driving project management

 (IDM)

 

Athamnia Brahim
Ounis Abedelhafid

Civil Engineering Department Faculty of Sciences University of Tebessa, Algeria

Seismic Response of base isolated building according to Algerian earthquake resistant regulations based on USA seismic code

 (IDM)

 

DINH Le Khanh Quoc
BUI Cong Thanh
NGUYEN Van Yen

Faculty of Civil Engineering, Ho Chi Minh City University of Technology, HCM City, Viet Nam

A Kind of Modified Infilled Masonry in Reinforced Concrete Frames Using Autoclaved Aerated Concrete Blocks

 (IDM)

 

NGUYEN Van Hiep

HCM City University of Technology

Summary of the Scientific Report “The Design of Residential Houses without Internal Supporting Columns”

 (IDM)

 

Christian Tridon

Chef d’entreprise dans le domaine de l’ingénierie des ouvrages d’art (sté ARTEM)

Les pathologies au service de l’innovation

 (IDM)

 

MAI Viet Chinh
VU Ngoc Quang

Institute of Technology for Special Engineering (ITSE), Le Quy Don University

Effect of shear connectors stiffness on displacements – internal forces in steel -concrete composite frame

 (IDM)

 

Ivelina Ivanova
Jules Assih

Université de Reims Champagne-Ardenne (URCA), France

Apport de la technique du collage de matériaux composites dans la
réhabilitation de structures en béton armé

 (IDM)

 

DAO Thi Nhu
NGUYEN Quoc Toan

Vietnam Urban Development Agency

Identifying awareness, evaluation and community needs on the urban architectural heritage in Hanoi, contributing to heritage conservation, building the identity city

 (IDM)

 

Pierre-Guillaume LANSIAUX
Alexandra VASILE 3

Groupe Qualiconsult
Agence Grands Travaux 
Zone Europarc
127/131 Chemin des Bassins
94035 CRETEIL Cedex

L’intégration de l’innovation dans l’acte de construire

 (IDM)

 

Hai-yong Xu
Yi-qun Fan

Shanghai municipal engineering design institute (Group) Co. Ltd., Shanghai, China;
and
Tongji University, Shanghai, China

Construction schemes of excavation and adding story of underground space
under existing structures

 (IDM)

 

E. Walther
R. Bennacer
C. Desa

LMT (ENS Cachan, CNRS, Université Paris Saclay) 94235 Cachan, France

Lattice Boltzmann Method Applied to Building Thermal Simulation

 (IDM)

 

Alexis Sauvageon
Caroline De-Sa
Rachid Bennacer
Pierre Wyniecki
Julien Niepceron

EDF-SEPTEN, GS/GC, Lyon, France
LMT, Ecole Normale Supérieure de Cachan (ENS Cachan/CNRS UMR 8535), Cachan, France
Université Paris-Est, Institut de Recherche en Constructibilité, ESTP, F-94230, Cachan, France

Development of an analytic solution for the buckling of steel-concrete-
structure under thermal loading

 (IDM)

 

Trung Kien NGUYEN
Albert ARGILAGA CLARAMUNT
Gaël COMBE
Jacques DESRUES

Grenoble INP – UJF – CNRS UMR5521, Laboratoire 3SR, Grenoble, France

FEM x DEM modeling: an innovative approach for computational geomechanics

 (IDM)

 

NGUYEN Quoc Toan

National university of Civil and Engineering, Vietnam

Identifying input information for Earned Value Management methods (EVM) in managing the construction projects from the view of construction contractors in Vietnam

 (IDM)

 

R. Mesnil
C. Douthe
O. Baverel
B. Léger

UMR Navier Ecole des Ponts ParisTech, France

Les surfaces moulures isogonales: une nouvelle grammaire formelle pour une haute congruence de nœuds dans les structures à géométrie complexe

 (IDM)

 

Sophie SIMONET
Annie-Claude BAYEUL-LAINÉ
Philippe CARPENTIER
Bernard CHARAT

LML, UMR CNRS 8107 Arts et Metiers Paristech Lille

CFD simulation of the airflow distribution in an historical building

 (IDM)

 

L. du Peloux
F. Tayeb
J-F. Caron
O. Baverel

T/E/S/S - atelier d’ingénierie - 7 Cité Paradis 75010 Paris, France

La cathédrale éphémère de Créteil : une couverture ultra légère de 350m2 faite d’une résille de tubes composites en GFRP

 (IDM)

 

Rui Neves

Barreiro Technology School, Polytechnic Institute of Setúbal, R. Américo da Silva Marinho, 2939-001, Barreiro, Portugal

Prevention of reinforcement corrosion in concrete structures: deemed-to-satisfy versus performance-based methodologies

 (IDM)

 

Ahmed Bouhaloufa
Tahar kadri
Samia Zouaoui

Laboratoire LMPC, Université de Mostaganem, Algerie

Renforcement des Ouvrages d’Art par la Précontrainte Additionnelle

 (IDM)

 

Mohammad Nahangi
Carl T. Haas

Department of Civil and Environmental Engineering, University of Waterloo, Canada

Automated shape discrepancy and redundancy detection in 3D laser scans of industrial assemblies

 (IDM)

 

Thibault Schwartz

GSA Laboratory - ENSAPM
France

On the use of robotics for research and development of novel casting
systems for spatial concrete lattices

 (IDM)

 

Allab Yacine
Kindinis Andrea
Simonet Sophie
Bayeul-Lainé Annie-Claude

Université Paris-Est, Institut de Recherche en Constructibilité, ESTP, F-94230, Cachan, France ; Ecole Nationale Supérieure d’Arts et Métiers, Laboratoire de Mécanique de Lille UMR 8107, France

Indoor climate assessment in school buildings - Implication on thermal comfort and indoor air quality

 (IDM)

 

Pierleoni Alice
Serra Valentina
Bianco Lorenza
Kindinis Andrea

Politecnico di Torino, Corso Duca degli Abruzzi, 24, 10129, Torino, Italy
TEBE research team – Politecnico di Torino, Corso Duca degli Abruzzi, 24, 10129,Torino, Italy
Université Paris-Est, Institut de Recherche en Constructibilité, ESTP, F-94230, Cachan, France

Innovative technologies for transparent building envelopes:
providing data on energy and comfort to facilitate the decision-making process

 (IDM)

 

G. Cattarin
A. Kindinis
F. Causone
L. Pagliano
JL. Lebrun

end-use Efficiency Research Group, Energy Department, Politecnico di Milano, Via Lambruschini 4, 20156, Milano, Italy
Université Paris-Est, Institut de Recherche en Constructibilité, ESTP, F-94230, Cachan, France

New Test Cell facility for characterizing building envelope components

 (IDM)

 

Thien-Phu LE
Cong-Thuat DANG
Pascal RAY

Institut Français de Mécanique Avancée
Danang University of Science and Technology

Structural seismic fragility curves using numerical simulations: a comparative study

 (IDM)

 

S. Ait taleb                        A. Si Salem                 Taouche-Kheloui             K. Ait tahar

Laboratoire Lamoms-Département de génie civil- Univ. Mouloud Mammeri de T-O. Algérie

Behavior of an innovative inhomogeneous modified concrete beam confined with continuous FRP-Jacket

 (IDM)

 

Van My NGUYEN Duy Hoa PHAM

University of Civil Engineering, Hanoi, Vietnam

A proposed solution to increase flutter stability for box-girder of cable-supported bridges under wind action

 (IDM)

 

Abudushamamu Aili
Matthieu Vandamme
Jean-Michel Torrenti

Université Paris-Est, IFSTTAR

On the notion of Poisson’s ratio in linear viscoelasticity: theory and practice

 (IDM)

 

Rabah CHAID
Laurent MOLEZ
A. Bouchouika

Université de Boumerdès, Algérie

Apport des déchets de verre sur la microstructure et la perméabilité des bétons en milieu séléniteux.

 (MFC)

 

Vu Hiep Dang
Raoul François
Linwen Yu
Valérie L’Hostis
Richard Gagné

Hanoi Architectural University, Department of Civil Engineering

Corrosion initiation and propagation of RC beams cracked by loading under chloride environment

 (MFC)

 

HUYNH Hieu Thao

Université Paris-Est Créteil, IFSTTAR, Département Matériaux et Structures

Géopolymères de nouvelle génération

 (MFC)

 

 Amel LIMAM
BAILHACHE Simon
QUENARD Daniel
ZERIZER Abdellatif

Université M’Hamed Bougara, Boumerdès, Algérie

Détermination des paramètres acoustiques des matériaux bio sourcés pour un usage en bâtiments. Cas d’application : bois du Pin d’Alep et liège Algérien

 (MFC)

 

Baba NDAO
Duc Phi DO
Dashnor HOXHA

Iuniversité d'Orléans

Progressive damage in cement-based material under loading: studied by bulk and shear wave tomography

 (MFC)

 

Chelouah NASSER
Arezki Samia
Tahakourt Abdelkader

Laboratoire de Génie de Construction et d’Architecture, Faculté de Technologie, Université de Bejaia, 06000 Bejaia, Algeria

The influence of crushed olive stones on the porosity of clay brick

 (MFC)

 

Toufik BOUBEKEUR
K. Ezziane
E. Kadri

Centre universitaire de Tissemssilt, BP 182, Tissemsilt (Algérie)
and
LAG, Université Hassiba Benbouali, BP 151,02000 Chlef(Algérie)

APPLICATION DU PRINCIPE DE LA MATURITE POUR LA PREVISION DE LA RESISTANCE MECANIQUE D’UN CIMENT COMPOSE EN CLIMAT CHAUD

 (MFC)

 

Samia HACHEMI
Abdelhafid OUNIS

Doctorante, Université Mohamed Khider, Biskra, Algérie

Evolution des propriétés mécaniques du béton soumis à haute température

 (MFC)

 

Manh Tan DO
Shin-Hyun JUNG

Hanoi University of Mining and Geology (HUMG)
And
Department of Civil and Environmental Engineering, Chonnam National University, Yeosu 550-749, Korean

Utilization of industrial by-products at Gwang-yang area for the production of excavatable controlled low strength materials

 (MFC)

 

Anh-Tu PHAM
François BIGNONNET
Ghazi HASSEN

Laboratoire Navier, École nationale des Ponts et chaussées, France

Strength domain of a matrix with elliptic criterion reinforced with rigid inclusions

 (MFC)

 

Thang LE
Gwenn LE SAOUT
Eric GARCIA-DIAZ
Sébastien REMOND

Centre des Matériaux des mines d'Alès (C2MA)
École des mines d'Alès (EMA)

Influence of the moisture condition or recycled concrete aggregates on the interfacial transition zone (ITZ) and the compressive strength of mortar

 (MFC)

 

Anh Binh TRAN
Q.H DO
 D.C PHAM

Department of Applied Informatics in Construction, National University of Civil Engineering, 55 Giai phong, Hanoi, Vietnam

Equivalent-inclusion approach and effective medium  approximations for the effective conductivity of matrix-particulate media

 (MFC)

 

Makhaly Ba
Meissa Fall
James M. Tinjum

Department of Geotechnical Engineering, University of Thies, Thies, Senegal - Department of Civil and Environmental Engineering, University of Wisconsin-Madison, Madison, USA

Comparison of Laboratory Resilient Modulus with Elastic Moduli measured with Soil Stiffness Gauge and Back-Calculated from Large Scale Model Experiment of Unbound Base Course

 (MFC)

 

Emmanuel Mengue
Hussein Mroueh
Laurent Lancelot
Robert Medjo Eko

Université Lille 1 - Laboratoire de Génie Civil et Géo-Environnement - Cité Scientifique - 59655 Villeneuve d’Ascq cedex, France

Evaluation de la résistance d’un sol latéritique fin traité pour des applications routières 

 (MFC)

 

Dac Loi NGUYEN
Luc DORMIEUX
Denis GARNIER
Camille CHATEAU

Laboratoire Navier, École nationale des Ponts et chaussées, France

Numerical simulation of a nano-indentation test on a material with elliptical strength criterion

 (MFC)

 

Kelly OLIVIER
Aveline DARQUENNES
Farid BENBOUDJEMA
Richard GAGNE

ENS Cachan / LMT-CNRS UMR8535 / UPMC / PRES-UniverSud Paris

Impact of material characteristics on the self-healing kinetic of cementitious materials

 (MFC)

 

Minh-Phuong TRAN
Pengjian Gong
Piyapong Buahom
Mehdi Saniei
Chul Park

Microcellular Plastic Manufacturing Laboratory (MPML), Mechanical and Industrial Department (MIE), University of Toronto - 5 King College Road, Toronto, ON M5S 3G8, Canada

DESIGNING POLYMERIC FOAM STRUCTURE AND STUDYING THE EFFECT OF EXPANDED GRAPHITE AS RADIATIVE ABSORBER IN THERMAL INSULATION PANEL

 (MFC)

 

M. Rabeli
B. Mezghiche
M. Bachar

Civil Engineering Research Laboratory, University of Biskra, 07000 Biskra, Algeria

Effects of cement type, w/c ratio and curing duration on initial absorption, compressive strength and carbonation depth of the cover concrete

 (MFC)

 

Khaleel Hassan Younis
Kypros Pilakoutas

Civil Techniques Dept., Erbil Polytechnic University, Kirkuk Road, Erbil, Kurdistan Region, Iraq

Mechanical performance of concrete containing recycled steel fibres and recycled
aggregate

 (MFC)

 

NGUYEN Tien Dung
LUU Van Sang

Ecole Nationale Superieure de Genie Civil, Vietnam

Utilisation de laitier de haut fourneau dans
le béton de haute performance pour les ouvrages en milieu maritime

 (MFC)

 

Douthe Cyril
Stefanou Ioannis
Geng Shuai

Université Paris-Est, IFSTTAR and NAVIER

Durabilité des gridshells élastiques en matériaux composites

 (MFC)

 

Nadjla MOSTEFAI
Rabah Hamzaoui
Sofiane Guessasma

Université Paris-Est, Institut de Recherche en Constructibilité, ESTP, 28 avenue du PrésidentWilson, 94234 Cachan, France

Effect of fly-ashes on the mechanical performance of hemp modified mortar

 (MFC)

 

Rabah Hamzaoui
Sofiane Guessasma Abdelkrim Bennabi

Université Paris-Est, Institut de Recherche en Constructibilité, ESTP, 28 avenue du
Président Wilson, 94234 Cachan, France

Kaolinite obtained by ball milling as a potential substituent for cement: Mechanic performances effect on mortar based cement and milled kaolinite

 (MFC)

 

R.M. Ghantous
V. L’Hostis
S. Poyet
R. François
N.C. Tran

CEA, DEN, DPC, SECR, Laboratoire d’Etude du comportement des Bétons et des Argiles, F-91191
Gif sur Yvette cedex, France

Reproducing the cooling towers cracks on laboratory specimens for corrosion induced by carbonation studies

 (MFC)

 

Louis Piccon
Ali Mesbah

nunc architectes
INSA de Strasbourg , département architecture

Construire un bâtiment public en pisé en France démarche innovante et pedagogique pour un matériau millenaire

 (MFC)

 

Jean-François Caron
Viet Anh Nguyen Trung
Robert Leroy

Université Paris-Est, Laboratoire Navier (École des Ponts ParisTech, IFSTTAR, CNRS)
École des Ponts Paristech, 6 et 8 avenue Blaise Pascal, 77455, Marne-la-Vallée, France

Timber beams including CFRP strips for new and ductile structural members - Experiments and Fracture modeling

 (MFC)

 

Nam Nghia BUI
Matthieu VANDAMME
Jean-Michel PEREIRA
Rémi BARBARULO

Université Paris-Est, Laboratoire Navier (ENPC, IFSTTAR, CNRS) 6-8 Av. B. Pascal, 77420 Champs Sur Marne, France

External sulfate attacks in cement-based materials: an experiment to induce fast and homogeneous swellings

 (MFC)

 

NGUYEN Thanh Hai
VU Xuan Hong
FERRIER Emmanuel
SI LARBI Amir

Université de Lyon, Université Lyon 1, Laboratoire Génie Civil et Ingénierie Environnementale
(LGCIE), INSA de Lyon, 82 bd Niels Bohr, F-69622 Villeurbanne, France

Contribution to the study of thermo-mechanical behavior at very high temperature of the textile reinforced mortar (TRC) and the interface TRC/epoxy adhesive/TRC

 (MFC)

 

Bach Quoc Tien
Philippe Poullain
Pierre Mounanga

LUNAM, Université Nantes-Angers-Le Mans, 58 rue Michel Ange BP 421 - 44606
Saint Nazaire Cedex
France

Influence du remplacement du ciment par des cendres volantes sur l’évolution hygrothermique du matériau au jeune âge

 (MFC)

 

Amina Khalifa
Tahar Kadri
Ahmed Bouhaloufa

LMPC, Université de Mostaganem, Algérie

L'influence de la corrosion sur le comportement mécanique d'un tablier d'un pont

 (MFC)

 

Layella Ziyani
Vincent Gaudefroy
Valéry Ferber
Ferhat Hammoum

LUNAM Université IFSTTAR, France
Entreprise CHARIER, France

Rational and practical approaches to study
the bitumen emulsion/mineral substrate interface

 (MFC)

 

Khadim Ndiaye  Stéphane Ginestet       Martin Cyr                             

Université de Toulouse; UPS, INSA; LMDC (Laboratoire Matériaux et Durabilité des Constructions de Toulouse)

Numerical study of thermochemical energy storage at low temperature using cementitious material

 (MFC)

 

Chady El Hachem Kamilia ABAHRI Farid BENBOUDJEMA Rachid Bennacer

ENS, Cachan

Humidity sensitivity of microscopic wood fibrous insulation

 (MFC)

 

Mai Lan Nguyen          J.M. Balay                         K. Bilodeau                       C. Sauzéat                        H. Di Benedetto              F. Olard                             B. Ficheroulle

(a) IFSTTAR, Bouguenais Cedex, France                      (b) BAUVAL, Boucherville (Québec), Canada                (c) University of Lyon/ENTPE, Vaulx-en-Velin Cedex, France                         (d) EIFFAGE Travaux Publics, Corbas, France                     (e) Chaussées Technique et Innovation, Paris, France

INVESTIGATION OF FIBRE REINFORCED ROLLER COMPACTED CONCRETE FOR HEAVY TRAFFIC PAVEMENT

 (MFC)

 

Thanh Hùng PHAM
Philippe PILVIN
Julien FEREC
Vincent PICANDET

Dépt de Génie Civil, Université d’Architecture de Hanoi
and
LIMatB, Université de Bretagne-Sud, Lorient

Modélisations numériques par homogénéisation de la conductivité
thermique de composites chaux–chanvre

 (MFC)

 

Contrada Francesca
Kindinis Andrea

Università di Pisa , Pisa, Italy
Université Paris-Est, Institut de Recherche en Constructibilité, ESTP, F-94230, Cachan, France

Hemp-lime in construction: applications, comfort qualities and critical analysis

 (MFC)

 

Viggiani Gioacchino
Frederic DUFOUR
Antoine TIXIER

Labo 3SR, Universite Joseph Fourier

Durability Analysis of Concrete Structures – Set up of an Experimental Campaign

 (AMS)

 

Pierre-Eric ALLIER
Ludovic CHAMOIN
Pierre LADEVEZE

LMT-Cachan

An a posteriori verification procedure for PGD reduced models

 (AMS)

 

Abdeddaim Mahdi
Ounis Abdelhafid

LARGHYDE, Mohamed khider University, Biskra, Algeria

Seismic response reduction using semi-active magneto-rheological dampers

 (AMS)

 

Camille Negrello
Christian REY
Pierre GOSSELET

LMT-Cachan/CNRS/Pres UniverSud Paris

Strongly parallel methods for virtual testing in nonlinear structure mechanics

 (AMS)

 


V.Nam NGUYEN
D.Nhan DAO
Phuong Hoa HOANG

Da Nang University

Predicting the responses of triple friction pendulum bearings using an improved physical model with variant friction coefficient

 (AMS)

 

Hervé RIOU
Pierre LADEVEZE
Andrea BARBARULO
Olivier LI HAO

LMT-Cachan (ENS Cachan/CNRS/Paris 6 University, PRES UniverSud Paris)

Simulation of vibrations of structure through hybrid methods

 (AMS)

 

Ba Tien LAI
Antonin FABBRI
Henry WONG
Denis BRANQUE 

Université de Lyon/ENTPE/LTDS (UMR CNRS 5513)

Simulation théorique du comportement physico-mécanique des sols fin quasi-saturés comportant de l'air occlus

 (AMS)

 

Jacques Lamon

LMT ENS Cachan
61, Avenue du Président Wilson, 94230 Cachan
France

Probabilistic approaches to brittle fracture and damage in ceramics and fibre reinforced ceramics

 (AMS)

 

Trung Thanh DANG

Hanoi University of Mining and Geology (HUMG), Vietnam

Analysis of microtunnel boring machine
using process simulation module

 (AMS)

 

Guguin GUILLAUME
Pierre GOSSELET
Allix OLIVIER

LMT-Cachan, ENS-Cachan, CNRS, Pres UniverSud Paris,

Bringing a 3D enrichment model into simplified plate’s model through a nonintrusive coupling strategy

 (AMS)

 

Thi Thanh Lam PHUNG

Vietnam National University- Institute of Vietnamese Studies and Development Sciences

HANOI’S STREET NAMES: HISTORY AND DEVELOPMENT

 (AMS)

 

F. Taouche-Kheloui
K. Ait tahar
S. Ait taleb
O.Bélaidi

Laboratoire Lamoms-Département de génie civil- Univ. Mouloud Mammeri de T-O. Algérie

Confinement hélicoïdal d’un  Cylindre en Béton : simulation numérique

 (AMS)

 

Ourdia BELAIDI
DIAKITE A. Sidiki
SADOU Wissem
HANNACHI Neceur Eddine
TAOUCHE-KHELOUI Fatma

Laboratoire LAMOMS, Université Mouloud Mammeri Tizi-Ouzou, Faculté du Génie de la Construction, Département de Génie Civil – Algérie.

Influence du béton dans un  poteau tubulaire d’un portique en charpente métallique : Conception et Analyse.

 (AMS)

 

 Alaa Eddin ISKEF
 Fabrice GATUIGT
 Frederic RAGUENEAU
 Cedric GIRY

LMT-Cachan, ENS-Cachan, CNRS, Pres UniverSud Paris,

Modélisation de la réponse mécanique nonlinéaire des structures en béton armé par approches simplifiées

 (AMS)

 

 Quang Phich NGUYEN
 Van Manh NGUYEN

Hanoi University of Mining and Geology (HUMG), Vietnam

Design of grouted rock bolts based on the rock reinforcement principle

 (AMS)

 

Sébastien BRISARD

Université Paris-Est, Laboratoire Navier (UMR 8205), CNRS, ENPC, IFSTTAR, F-77455 Marne-la-Vallée

Overview of FFT-based homogenization techniques from the Garlekin point of view

 (AMS)

 

P. Phung-Van
Loc V. Tran
M. Abdel-Wahab
H. Nguyen-Xuan

Department of Mechanical Construction and Production, Faculty of Engineering and Architecture, Ghent University, Gent, Belgium

Geometrically nonlinear analysis of piezoelectric FGM plates using isogeometric analysis

 (AMS)

 

Chu Tuan Long
Ha Minh Cuong
Abdellatif IMAD

Mechanics Laboratory of Lille (LML), University of Lille1, France
Laboratory of Mechanics and Technology (LMT-Cachan), ENS Cachan, France

Homogénéisation du comportement transversal en compression d’un fil Kevlar©

 (AMS)

 

Lionel RAFFIN

Directeur associé de GEOSAT - Enseignant à l'ESTP & à la Sorbonne

Imagerie 4D et modélisation 3D des données Big Data des scanners lasers 3D

 (AMS)

 

Loc V. Tran
P. Phung-Van
Jaehong Lee
H. Nguyen-Xuan
M. Adbel Wahab

Department of Mechanical Construction and Production, Faculty of Engineering and Architecture, Ghent University, 9000, Ghent – Belgium

Nonlinear transient isogeometric analysis of laminated composite plates

 (AMS)

 

DAO Duy Lam

University of Transport and Communications, Vietnam

A bi-potential update algorithm for the non-associated plasticity model with hardening

 (AMS)

 

Hong-Hai NGUYEN

Centre Scientifique et Technique du Bâtiment (CSTB), 84 avenue Jean Jaurès, Champs-sur Marne, 77447 Marne-la-Vallée Cedex 2, France

Sectional Analysis: Heating, Cooling and Post-Fire Assessment

 (AMS)

 

Viet Duc Ngo
Thomas de Larrard
Frédéric Duprat

Université de Toulouse III, UPS/INSA, LMDC (Laboratoire Matériaux et Durabilité des Constructions), 135 avenue de Rangueil – 31077 Toulouse cedex 4, France

Modeling concrete carbonation: from a complex Finite Elements model to an approximate estimation for engineers

 (AMS)

 

Guy-de-patience Ftatsi Mbetmi
Thomas de Larrard
Frédéric Duprat

Université de Toulouse, LMDC UPS/INSA, INSA, 135 avenue de Rangueil, 31077 Toulouse cedex, France ; Université de Ngaoundéré, B.P. 454, Ngaoundéré, Cameroun

Structural damage prediction of an AAR affected dam with Cast3M

 (AMS)

 

Hatem KALLEL
Hélène CARRÉ
Christian LABORDERIE
Benoit MASSON
NhuCuong TRAN

SIAME EA-4581, University of Pau and Pays de l'Adour, France

Effect of temperature and moisture on the fracture energy of concrete

 (AMS)

 

ARQUIER Mathieu
CESPEDES Xavier

STRAINS ENGENERING, 37-39 rue Dareau, 75014, Paris, France

Limit analysis for civil engineering structures

 (AMS)

 

Mohammed Khalil Ferradi
Xavier Cespedes
Arthur Lebée
Karam Sab

STRAINS ENGENERING, 37-39 rue Dareau, 75014, Paris, France

A software for structural analysis: an asymptotic expansion method for
a higher order beam element

 (AMS)

 

Jin WANG
Laurie BUFFO-LACARRIERE
Alain SELLIER

Université de Toulouse; UPS, INSA; LMDC (Laboratoire Matériaux et Durabilité des
Constructions); 135, avenue de Rangueil; F-31 077 Toulouse Cedex 04, France

Dehydration process of cement pastes under different heating rates

 (AMS)

 

CHAU Truong Linh

University of Science and Technology, Danang University, Viet Nam

Real failures and research on stress – strain behavior, service life over time of the mechanically stabilized earth wall due to reinforcement steel corrosion based on physical and numerical models

 (AMS)

 

NGUYEN Thanh Trung
Osamu KIYOMIYA
NGUYEN Thi Tuyet Trinh

Dept. of Urban Transport & Coastal Engineering, University of Transport and Communications, Vietnam

The Behavior of Liquefied Sand Models in an Undrained and a Drained Condition during Earthquake

 (AMS)

 

Heba Kamal El Dine Moustafa

Centre de Recherche Nationale sur L'habitation et la Construction (HBRC)

Performance Sismique d'EL-AZHAR Existant de Tunnels de Route Seismic Performance of EL-AZHAR Existing Road Tunnels

 (AMS)

 

V. Priasso
J. Lamon
P. Ladevèze
C. Ha-Minh
C. Petiot

LMT-Cachan. ENS Cachan/CNRS/UniversitéParisSaclay.
61 avenue du Président Wilson, F-94235 Cachan , France

Modélisation de l’endommagement de l’interleaf des composites stratifiés

 (AMS)

 

COURRIER Nicolas
BOUCARD Pierre-Alain
SOULIER Bruno

LMT Cachan(ENS Cachan/CNRS/Université Paris Saclay)

Optimisation multi-fidélité d’assemblages de structures

 (AMS)

 

Christophe Rouzaud
Fabrice Gatuingt
Guillaume Hervé
Nadim Moussallam
Olivier Dorival

LMT (ENS Cachan, CNRS, Université Paris Saclay), 61, avenue du Président Wilson, 94235 Cachan, France

Qualification of vibrations induced during an aircraft crash through an adapted frequency analysis

 (AMS)

 

João Camões Lourenço
Arézou Modaressi Farahmand Razavi

École Centrale Paris, Instituto Superior Técnico

Seismic soil-pile interaction analysis through and advanced elastoplastic constitutive model

 (AMS)

 

F. Tayeb
B. Lefevre
L. du Peloux

Laboratoire Navier (École des Ponts ParisTech, IFSTTAR, CNRS)
École des Ponts Paristech, 6 et 8 avenue Blaise Pascal, 77455, Marne-la-Vallée, France

Modélisation de poutres élancées. Présentation d’un modèle de poutres permettant de prendre en compte la torsion au sein des poutres. Application aux gridshells

 (AMS)

 

B. O. B. Sentosa
J.-P. Plassiard
Q.-B. Bui
O. Plé
P. Perrotin

Université de Savoie, POLYTECH Annecy-Chambéry, LOCIE, 73376 Le Bourget du Lac, France

Assessing the column-beam connection’s damages: experimental and numerical studies

 (AMS)

 

Ibrahim BITAR(a), Stéphane GRANGE(b), Panagiotis KOTRONIS(a), Nathan BENKEMOUN©

(a):LUNAM, Ecole Centrale de Nantes, Université de Nantes, CNRS/Institut de Recherche en Génie Civil et Mécanique (GeM), UMR 6183                                             (b): Université Grenoble Alpes, 3SR, F-38000 Grenoble, France / CNRS, 3SR, F38000 Grenoble, France                                        (c): LUNAM, IUT Saint-Nazaire, Université de Nantes, CNRS / Institut de Recherche en Génie Civil et Mécanique (GeM), UMR 6183

A review on various formulations of displacement based multi-fiber straight Timoshenko beam finite elements

 (AMS)

 

Giuseppe Sciumè (a)     Farid Benboudjema(b) Francesco Pesavento (c) Bernhard Schrefler (d)

(a) Department of Innovation Engineering, University of Salento, Lecce (Italy)                                      (b) Laboratoire de Mécanique et Technologie, Ecole Normale Supérieure de Cachan, (France)            (c) Department of Civil, Architectural and Environmental Engineering, University of Padua (Italy)  (d) International Center for Mechanical Sciences CISM, Udine (Italy)

A multi-physics model of young concrete as relevant support for design of sustainable and durable structures

 (AMS)

 

Thuong Anh NGUYEN(a) Pierre LABBE (a)   Guillaume HERVE (a)           Jean-François SEMBLAT(b)

(a) Université Paris-Est, RENON (IRC-ESTP, IFSTTAR), IRC-ESTP  (b)Université Paris-Est, RENON (IRC-ESTP, IFSTTAR), IFSTTAR,

Analyse systématique du concept de comportement linéaire équivalent en ingénierie sismique

 (AMS)

 

Gustavo MENDOZA CHAVEZ              Guillaume HERVE  Patrick de BUHAN Christophe ROZAUD

Université Paris-Est, RENON (IRC-ESTP, IFSTTAR), IRC-ESTP                          Université Paris-Est, ENPC

Conception de structures massives en béton armé par treillis bielles-tirants générés automatiquement

 (AMS)

 

Gustavo MENDOZA-CHAVEZ                    Thuong Anh NGUYEN Guillaume HERVE  Christophe ROUZAUD1

Université Paris-Est, RENON (IRC-ESTP, IFSTTAR), IRC-ESTP, 28 avenue du Président Wilson, F-94234 Cachan, France

Evaluation de force d’impact d’avion sur la structure en béton armé par la formule RIERA en prenant compte l’effet de flambage plastique des tubes en compression

 (AMS)

 

M-B. HOCINE                   P. Labbé                            G. Hervé                            F. Toulemonde

Université Paris-Est, RENON (IRC-ESTP, IFSTTAR), IRC-ESTP, 28 avenues du Président Wilson, 94230 Cachan, France       Université Paris-Est, RENON (IRC-ESTP, IFSTTAR), IFSTTAR, 6-8 avenue Blaise Pascal, F-77455 Marne-la-Vallée, France

Linéarisation du comportement sous séisme de structures à voiles en béton armé

 (AMS)

 

Janaina P. S. Oliveira Thais V. Amaral   Adenilcia F. G. Calenzani Ricardo Hallal Fakury Walnório G. Ferreira

University of Espírito Santo
Vitória – Espírito Santo
Brazil

Critical Moment of Lateral Distortional Buckling of Continuous Composite on Beams

 (AMS)

 

Thien-Phu LE
Pierre ARGOUL

Institut Français de Mécanique Avancée
Ecole des Ponts PariTech 

A new method for modal identification based on continuous wavelet transform and ambient vibration responses

 (AMS)

 
Personnes connectées : 1